ציוד מחקר
Irena Levin | 217 | An automatic particle sizer designed for use with either concentrated suspensions of small particles or solutions of macromolecules. |
NanoBrook 90Plus PALS | |
Irena Levin | 217 | A Desktop Stereolithography 3D Printer |
Form 2 | |
Irena Levin | 212 | A high pressure, compact laboratory reactors. Parr controller model 4848 with 600 mL reactor vessel, equipped with gas inlet and outlet valves, a liquid sampling valve, pressure gage, safety rupture disc, and internal thermocouple. |
Parr reactor | |
Irena Levin | 212 | CIP is used for pressing samples with regular and irregular shapes in a high-pressurized chamber, making the sample highly compressed and leading to higher density and strength. |
Cold isostatic press CIP-M20 | |
Irena Levin | 212 | Carver Press | ||
Irena Levin | 212 | Tube furnaces provide even heating of the tube surface for maximum temperature uniformity. Up to 1200 or 1500 °C in air. |
Tube furnaces | |
Sioma Baltianski | 312 | Electrical measurments | This setup allows to carry out impedance spectroscopy in the frequency range from 1 MHz to 1 mHz, at temperatures up to 600 °C. Biologic SP-200 / SP-240 / SP-300 Potentiostat/ Galvanostat can be used. |
Potentiostat / Galvanostat and furnace |
Sioma Baltianski | 312 | Electrical measurments | The measurement system based on Precision Impedance Analyzer Agilent 4294A. Allows to carry out the Impedance Spectroscopy up to frequency 110 MHZ. |
Precision impedance measurements |
Sioma Baltianski | 312 | Electrical measurments | Based on Keithley 2400 Source-Meter and Special Soft-Probe. Designed primarily for measuring conductive coatings. |
Four-point measurements |
Irena Levin | 312 | This setup allows to conduct different temperature treatments up to 1500 °C in a selected gas environment, such as Argon or Nitrogen. |
Tube furnace combined with a gas system | |
Sioma Baltianski | 312 | Dilatometry | Allows to carry out combined measurements of the coefficients of thermal expansion up to 1500 °C and electrical impedance in situ. |
An upgraded dilatometer DIL801 |
Sioma Baltianski | 312 | Dilatometry | Allows differential measurements of thermal expansion coefficients up to 1700 °C. |
DIL802 differential dilatometer |
Youbin/Ning/Arnab/Rawan | 312 | Spray Coater | ||
Walaa/Youbin/Rawan | 312 | 3D Printer | ||
Ning/Youbin | 10 | Electrochemical System | ||
Youbin/Rawan | 10 | FET System | ||
Walaa/Elias | 312 | N2 generator | ||
All | 312 | Temp. controle system | ||
Yana | 10 | Probe station | ||
All | 312 | Optic microscopy | ||
Youbin/Arnab | 312 | Centrifuge | ||
Shelley/Walaa | 312 | Bubbler system New | ||
Shelley/Walaa | 312 | Bubbler system old | ||
All | 312 | Analytical weight | ||
All | 312 | Chemical hood | ||
Walaa | 312 | Vacuum oven | ||
Walaa | 312 | Oven | ||
Youbin/Walaa | 312 | Glove box | ||
Elias | 312 | Evaporator | ||
Walaa | 312 | refrigerator | ||
All | 312 | Ultrasonic bath | ||
Shelley/Ron/Shay/Elias | 312 | Enose | ||
Gennady Shter | 316 | General Equipment | Thermal treatment under various gas flow, till 1300 C |
Box and tube furnaces |
Gennady Shter | 315 | Material characterization | Simultaneaous themogravimetry and differential thermoanalysis |
Thermo-analyzer (Setaram France) |
Gennady Shter | 315 | Material characterization | TMA -Measuring of linear changes under heating-cooling in the range of RT -1600C |
Dilatometer (Setaram,France) |
Meirav Mann-Lahav | 100 | Material characterization | Characterization of the surface area of solid materials by BET test |
Surface area analyzer ( Micromeritics,USA) |
Hila Shemer | Rabin Desalination laboratory | Particle sizing | Particle size determination of colloid fluids; Molecular weight; Zeta potential |
Zetasizer NanoZS |
Hila Shemer | Rabin Desalination laboratory | Particle sizing | Measurement performance from submicron to millimeter; Wet or dry, from milligram quantities of precious pharmaceuticals to the measurement of bulk chemicals and minerals |
Mastersizer 2000 |
Yaron Paz | 214 | Chemical analysis | Polarimeter | |
Yaron Paz | 215 | Synthesis | Executing humidity – sensitive reactions |
Glove box (M Brown) |
Yaron Paz | 215 | Synthesis | Up to 1100 C |
Box furnace (Carbolite RHF 1400) |
Yaron Paz | 214 A,215 | Synthesis | Up to 1100 C |
2 Tube furnaces (Carbolite) |
Yaron Paz | 214 A | Water / air treatment | Ozone generator (Triogen) | |
Yaron Paz | 215 A | Cell growth | Orbital shaker incubator (MRC) | |
Yaron Paz | 215 A | Chemical analysis,Synthesis | basic |
Centrifuge NF048 |
Yaron Paz | 214 | Surface cleaning | Uses short UV for cleaning surfaces |
UVO cleaner (UVOCS 42-220) |
Yaron Paz | 215 A | coating | Spray coating |
Atomizer (sonics vibracell) |
Yaron Paz | 215 A | Surface cleaning | Uses plasma for surface treatment |
Plasma cleaner |
Yaron Paz | 214 | Chemical analysis | Basic |
UV-vis spectrophotometer (Shimadzu UV-2600) |
Yaron Paz | 214 | Chemical analysis | basic |
HPLC (Agilent 1100) |
Yaron Paz | 214 | optics | Including third harmonic output (355 nm), OPO (400-650 nm), connected to the FTIR to facilitate fast spectroscopy (ns scale resolution) |
Nd-YAG laser system (Quantel, Q-smart 450) |
Yaron Paz | 214 | Chemical analysis,surface analysis | FTIR under vacuum environment, including the following accessories: MCT and DTGS detectors, horizontal ATR, vertical ATR, circle cell ATR, gas cell, diffused reflection, KBr pellets. Step scan option. |
FTIR V70 (Bruker) |